SDP 2011-2016 LML 3" Y-bridge/Passenger side IC pipe kit with 4" intake

  *Cannot be sold or shipped to California addresses*   The passenger side intercooler plumbing as well as the billet Y-bridge setup will allow you to easily upgrade to one of our compound turbo kits, S300 turbo kit or S400 turbo kit...

Driver Side Intercooler Pipe Strap

The driver side intercooler pipe strap connects the top of the SDP driver side intercooler pipe to the top of the turbo compressor housing to prevent the intercooler pipe from blowing off the turbo in high boost situations. 

LML Factory Location Coolant Tank

This coolant tank is currently only made to work with our 4" intake kits or single turbo kits. Please call or email us if you'd like to order one to work with the stock intake.

4" Intake Pre-Filter

Pre-Filter for our 4" Dry Filter  

4" Intake Replacement Air Filter

Replacement 4" Dry Filter for our 4" Intakes, S300 Single Turbo Kit's, & LML Y-Bridge Kit's.

SDP LML Coolant crossover pipe 2011-2016

This is an upgrade to the factory upper coolant hose going to the radiator. We make ours out of 304 Stainless Steel so you can be worry free of rust and deforming as you would get from either steel or aluminum. We can add 1/8"NPT bungs as necessary so...

SDP 11-16 LML Resonator Cap

SDP 2011-2016 LML 3" Drivers side Intercooler pipe

*These are now a 2-piece design for much easier installation. We are currently designing a 'brace' which will be an add on to the current product, it will keep the upper pipe from potentially sliding out of the upper boot when over 50psi which some have...

SDP 2011-16 LML Passenger side intercooler pipe kit

*This product cannot be sold or shipped to California addresses.   Full 3" High-flow intercooler pipe for the passenger side for use with the factory Y-bridge Allows you to fully delete the intake heater and the weak plastic intercooler pipe Has...