SDP 2011-2016 LML 3" Y-bridge/Passenger side IC pipe kit with 4" intake

  *Cannot be sold or shipped to California addresses*   The passenger side intercooler plumbing as well as the billet Y-bridge setup will allow you to easily upgrade to one of our compound turbo kits, S300 turbo kit or S400 turbo kit...

LMM 4" intake

This is a complete 4" intake kit for an LMM Duramax that will work on a stock truck or with any drop in replacement turbos and/or intercooler plumbing.  Expect more airflow for HP gains and lower EGT's, not to mention good looks with any color...

LBZ 4" intake

This is a complete 4" intake kit for an LMM Duramax that will work on a stock truck or with any drop in replacement turbos and/or intercooler plumbing.  Expect more airflow for HP gains and lower EGT's, not to mention good looks with any color...

SDP LML Coolant crossover pipe 2011-2016

This is an upgrade to the factory upper coolant hose going to the radiator. We make ours out of 304 Stainless Steel so you can be worry free of rust and deforming as you would get from either steel or aluminum. We can add 1/8"NPT bungs as necessary so...

SDP Hot Side Intercooler pipe- Drivers side 2006-2010

Here at SDP we've designed a hot side/driver side IC pipe for the 2006-2010 Duramax trucks that fits perfectly with the stock turbo in place. Each pipe is made in house using precision tig welding with mandrel bent tubing. To get the best possible...

SDP 2011-2016 LML 3" Drivers side Intercooler pipe

*These are now a 2-piece design for much easier installation. We are currently designing a 'brace' which will be an add on to the current product, it will keep the upper pipe from potentially sliding out of the upper boot when over 50psi which some have...

SDP 3" High-flow Billet Y-Bridge & Intercooler Pipe kit - LBZ LMM

 *Cannot be sold or shipped to California addresses*   This is our new high-flow billet 3" Y-bridge with a full 3” bore! We used computational fluid dynamic software to test the air flow and turbulence in the factory Y-bridge, and using...

SDP 2011-16 LML Passenger side intercooler pipe kit

*This product cannot be sold or shipped to California addresses.   Full 3" High-flow intercooler pipe for the passenger side for use with the factory Y-bridge Allows you to fully delete the intake heater and the weak plastic intercooler pipe Has...